Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Could not pull up-to-date tc2 source codes
12-03-2014, 11:07 AM
Post: #1
Could not pull up-to-date tc2 source codes
I could not pull up-to-date tc2 git tree.

harryxiyou@common_vm ~/forest/tc2/tc2 $ git pull
ssh: connect to host codb3.datathinking.org port 13122: Connection timed out
fatal: The remote end hung up unexpectedly
Find all posts by this user
Quote this message in a reply
12-03-2014, 11:37 AM
Post: #2
RE: Could not pull up-to-date tc2 source codes
Seems network problem.

Code:
$ tracepath codb3.datathinking.org
1:  pha023.phys.ust.hk (143.89.18.173)                     0.083ms pmtu 1500
1:  phys-gw1.phys.ust.hk (143.89.19.245)                   0.851ms
1:  phys-gw1.phys.ust.hk (143.89.19.245)                   0.516ms
2:  202.14.80.155 (202.14.80.155)                          9.015ms
3:  203.188.117.129 (203.188.117.129)                     11.900ms
4:  203.188.118.122 (203.188.118.122)                     11.315ms
5:  ten0-1-1-2.br04.hkg05.pccwbtn.net (63.218.56.109)     12.647ms
6:  TenGE13-0-0.cr02.hkg04.pccwbtn.net (63.218.60.238)    11.276ms asymm  8
7:  chinatelecom.pos9-0.cr02.hkg04.pccwbtn.net (63.218.61.190)  19.289ms asymm  9
8:  202.97.60.29 (202.97.60.29)                           20.963ms asymm  9
9:  no reply
10:  202.97.33.237 (202.97.33.237)                         11.829ms
11:  202.97.77.74 (202.97.77.74)                           41.730ms asymm 12
12:  no reply
13:  no reply
14:  no reply
15:  no reply
16:  no reply
17:  no reply
18:  no reply
19:  no reply
20:  no reply
21:  no reply
22:  no reply
23:  no reply
24:  no reply
25:  no reply
26:  no reply
27:  no reply
28:  no reply
29:  no reply
30:  no reply
31:  no reply
     Too many hops: pmtu 1500
     Resume: pmtu 1500

$ tracepath mx.d-thinker.org
1:  pha023.phys.ust.hk (143.89.18.173)                     0.090ms pmtu 1500
1:  phys-gw1.phys.ust.hk (143.89.19.245)                   1.953ms
1:  phys-gw1.phys.ust.hk (143.89.19.245)                   0.569ms
2:  202.14.80.155 (202.14.80.155)                          8.997ms
3:  203.188.117.129 (203.188.117.129)                     10.172ms
4:  203.188.118.122 (203.188.118.122)                     10.169ms
5:  ten0-1-1-2.br04.hkg05.pccwbtn.net (63.218.56.109)     10.431ms
6:  TenGE13-0-0.cr02.hkg04.pccwbtn.net (63.218.60.238)    10.575ms asymm  8
7:  chinatelecom.pos9-0.cr02.hkg04.pccwbtn.net (63.218.61.190)  13.753ms asymm  9
8:  202.97.60.29 (202.97.60.29)                           15.599ms asymm  9
9:  no reply
10:  202.97.60.6 (202.97.60.6)                             12.920ms
11:  202.97.77.74 (202.97.77.74)                           42.514ms asymm 12
12:  no reply
13:  no reply
Quote this message in a reply
12-03-2014, 01:32 PM
Post: #3
RE: Could not pull up-to-date tc2 source codes
(12-03-2014 11:37 AM)zma Wrote:  Seems network problem.

Code:
$ tracepath codb3.datathinking.org
1:  pha023.phys.ust.hk (143.89.18.173)                     0.083ms pmtu 1500
1:  phys-gw1.phys.ust.hk (143.89.19.245)                   0.851ms
1:  phys-gw1.phys.ust.hk (143.89.19.245)                   0.516ms
2:  202.14.80.155 (202.14.80.155)                          9.015ms
3:  203.188.117.129 (203.188.117.129)                     11.900ms
4:  203.188.118.122 (203.188.118.122)                     11.315ms
5:  ten0-1-1-2.br04.hkg05.pccwbtn.net (63.218.56.109)     12.647ms
6:  TenGE13-0-0.cr02.hkg04.pccwbtn.net (63.218.60.238)    11.276ms asymm  8
7:  chinatelecom.pos9-0.cr02.hkg04.pccwbtn.net (63.218.61.190)  19.289ms asymm  9
8:  202.97.60.29 (202.97.60.29)                           20.963ms asymm  9
9:  no reply
10:  202.97.33.237 (202.97.33.237)                         11.829ms
11:  202.97.77.74 (202.97.77.74)                           41.730ms asymm 12
12:  no reply
13:  no reply
14:  no reply
15:  no reply
16:  no reply
17:  no reply
18:  no reply
19:  no reply
20:  no reply
21:  no reply
22:  no reply
23:  no reply
24:  no reply
25:  no reply
26:  no reply
27:  no reply
28:  no reply
29:  no reply
30:  no reply
31:  no reply
     Too many hops: pmtu 1500
     Resume: pmtu 1500

$ tracepath mx.d-thinker.org
1:  pha023.phys.ust.hk (143.89.18.173)                     0.090ms pmtu 1500
1:  phys-gw1.phys.ust.hk (143.89.19.245)                   1.953ms
1:  phys-gw1.phys.ust.hk (143.89.19.245)                   0.569ms
2:  202.14.80.155 (202.14.80.155)                          8.997ms
3:  203.188.117.129 (203.188.117.129)                     10.172ms
4:  203.188.118.122 (203.188.118.122)                     10.169ms
5:  ten0-1-1-2.br04.hkg05.pccwbtn.net (63.218.56.109)     10.431ms
6:  TenGE13-0-0.cr02.hkg04.pccwbtn.net (63.218.60.238)    10.575ms asymm  8
7:  chinatelecom.pos9-0.cr02.hkg04.pccwbtn.net (63.218.61.190)  13.753ms asymm  9
8:  202.97.60.29 (202.97.60.29)                           15.599ms asymm  9
9:  no reply
10:  202.97.60.6 (202.97.60.6)                             12.920ms
11:  202.97.77.74 (202.97.77.74)                           42.514ms asymm 12
12:  no reply
13:  no reply

Now, it works for me, thx
Find all posts by this user
Quote this message in a reply
12-03-2014, 01:56 PM
Post: #4
RE: Could not pull up-to-date tc2 source codes
seems network is back.
Quote this message in a reply
Post Reply 


Forum Jump: