show parts information

[xwcwt]

Copy form ZB written by Dr.Li:


When we click "show parts" for a node, we are supposed to see the following information:

Class Model Capacity SerialNo Location DeliveryDate BRNo Vendor Note

HD Seagate 1TB 7200.12 hard disk ST31000528AS 1TB SFP20101753 SFS20100401 2010-08-26

the page title is server name

We should put the SerialNo on one small sticker, and the Model and vendor information on another sticker and attach the two stickers to the component when it's on the shelf.

And then we should record all the information in the table above into the node-list

同时和Xinjie进行了简单讨论， 认为还是需要将部件SN号以某种形式和部件结合起来，因为如果一块硬盘坏了如果没有这种联系则会分不清到底是哪个供应商处购买。

---
20230107/ray: page title

[xwcwt]

和Xinjie进行了简单讨论， 认为还是需要将部件SN号以某种形式和部件结合起来，或直接用圆珠笔卸载部件原本的标签纸上，或使用另外的标签纸，写好部件号后直接贴上去（之前的做法即如此）。 个人倾向于后者，同时之前选用的标签纸粘性较差容易脱落，应该重新选择，应当做到既有粘性美观度较好。

@all.

[lingu]

(05-16-2017 11:21 AM)xwcwt Wrote:  和Xinjie进行了简单讨论， 认为还是需要将部件SN号以某种形式和部件结合起来，

Driving example?

Quote:或直接用圆珠笔卸载部件原本的标签纸上，或使用另外的标签纸，写好部件号后直接贴上去（之前的做法即如此）。 个人倾向于后者，同时之前选用的标签纸粘性较差容易脱落，应该重新选择，应当做到既有粘性美观度较好。

@all.

Maybe start from one item, e.g., HD, after it is justified.

[xwcwt]

(05-17-2017 03:02 PM)lingu Wrote:  

(05-16-2017 11:21 AM)xwcwt Wrote:  和Xinjie进行了简单讨论， 认为还是需要将部件SN号以某种形式和部件结合起来，

Driving example?

Added into the head-post.

[lingu]

(11-04-2015 05:29 PM)xwcwt Wrote:  同时和Xinjie进行了简单讨论， 认为还是需要将部件SN号以某种形式和部件结合起来，因为如果一块硬盘坏了如果没有这种联系则会分不清到底是哪个供应商处购买。

贴条很麻烦。小部件没法贴条。内存就不好贴条，时间久了标签干了被风扇一吹机箱里到处都是。

可以一类一议，不要统一规定。硬盘可以贴条。如果贴条，就规定一律要贴。

你贴了条，有了我们自己的SN，怎么把这个SN跟供应商对应起来呢？这里要综合考虑。还是那句话，一类一议，议就要议清楚，要从工作流全局考虑。

[ray]

when we click 'show parts' of a server, the page does not display the server name, when we open batch of server info, it will be hard to make off.

so i change the page title as the server name.

[lingu]

(01-07-2023 09:19 PM)ray Wrote:  when we click 'show parts' of a server, the page does not display the server name, when we open batch of server info, it will be hard to make off.

so i change the page title as the server name.

i dont quite understand. i guess you mean to just change the title of the page showing server parts. That's fine.

In the future, make sure to DIRECT.

[ray]

(01-07-2023 09:36 PM)lingu Wrote:  

(01-07-2023 09:19 PM)ray Wrote:  when we click 'show parts' of a server, the page does not display the server name, when we open batch of server info, it will be hard to make off.

so i change the page title as the server name.

i dont quite understand. i guess you mean to just change the title of the page showing server parts. That's fine.

this is what i mean.

Quote:In the future, make sure to DIRECT.

ok.