connectiopn reset on codb2 - Printable Version

connectiopn reset on codb2 - Printable Version

+- Technology and Beyond (TaB) (http://tab.d-thinker.org)
+-- Forum: Data Thinker (/forumdisplay.php?fid=896)
+--- Forum: Resources (/forumdisplay.php?fid=211)
+---- Forum: Completed work (/forumdisplay.php?fid=275)
+---- Thread: connectiopn reset on codb2 (/showthread.php?tid=4591)

connectiopn reset on codb2 - amoners - 11-02-2015 11:27 AM

I tried to pull code from origin/rc of greppyweb, but I failed. I am guardian of codb2, but I also can not connect this VM. It seems that some problem in its host.

@zma: You are guardian of this PH(Carus). Please confirm that. Thanks.

Code:

[amoners@berners-lee greppyweb]$ cod pull

ssh_exchange_identification: Connection closed by remote host

fatal: Could not read from remote repository.

Please make sure you have the correct access rights

and the repository exists.

RE: connectiopn reset on codb2 - zma - 11-02-2015 11:38 AM

Asked DC to reboot it: http://tab.d-thinker.org/showthread.php?tid=3320&pid=12675#pid12675

RE: connectiopn reset on codb2 - amoners - 11-02-2015 01:06 PM

(11-02-2015 11:38 AM)zma Wrote: Asked DC to reboot it: http://tab.d-thinker.org/showthread.php?tid=3320&pid=12675#pid12675

It seems that codb2 is down.

@zma: Could you start this VM for me?

RE: connectiopn reset on codb2 - zma - 11-02-2015 01:13 PM

(11-02-2015 01:06 PM)amoners Wrote: It seems that codb2 is down.

@zma: Could you start this VM for me?

Can you start it via Constella?

RE: connectiopn reset on codb2 - amoners - 11-02-2015 01:41 PM

(11-02-2015 01:13 PM)zma Wrote:
(11-02-2015 01:06 PM)amoners Wrote: It seems that codb2 is down.

@zma: Could you start this VM for me?

Can you start it via Constella?

I am not sure about I have this privilege on Constella in HK. It is constella0e0, am I right? I can visit this page, but I can't login since the page is loading forever.

RE: connectiopn reset on codb2 - amoners - 11-02-2015 01:54 PM

(11-02-2015 01:41 PM)amoners Wrote:
(11-02-2015 01:13 PM)zma Wrote:
(11-02-2015 01:06 PM)amoners Wrote: It seems that codb2 is down.

@zma: Could you start this VM for me?

Can you start it via Constella?

I am not sure about I have this privilege on Constella in HK. It is constella0e0, am I right? I can visit this page, but I can't login since the page is loading forever.

Finally, I logged in, but I have not privilege to start VM, and I only can see three hosts(tesla, watt and host203). There is no codb2's host Carus.

RE: connectiopn reset on codb2 - zma - 11-02-2015 02:08 PM

(11-02-2015 01:54 PM)amoners Wrote: Finally, I logged in, but I have not privilege to start VM, and I only can see three hosts(tesla, watt and host203). There is no codb2's host Carus.

Carus is managed by the Constella instance in NB. We ever used it to move VMs. Please try that one.

RE: connectiopn reset on codb2 - amoners - 11-02-2015 02:24 PM

(11-02-2015 02:08 PM)zma Wrote:
(11-02-2015 01:54 PM)amoners Wrote: Finally, I logged in, but I have not privilege to start VM, and I only can see three hosts(tesla, watt and host203). There is no codb2's host Carus.

Carus is managed by the Constella instance in NB. We ever used it to move VMs. Please try that one.

Please provide codb2's name in Carus, like 'l0web0e1-rider2'. So I can add this VM in Constella, or there is a exist name but I never find. Thanks.

RE: connectiopn reset on codb2 - zma - 11-02-2015 03:23 PM

(11-02-2015 02:24 PM)amoners Wrote: Please provide codb2's name in Carus, like 'l0web0e1-rider2'. So I can add this VM in Constella, or there is a exist name but I never find. Thanks.

I don't know either.. Here is a list of VM I find on it while they are not in Constella, please check:

gitbj0e1
gitliter0e2
rider2e3

RE: connectiopn reset on codb2 - amoners - 11-02-2015 04:37 PM

(11-02-2015 03:23 PM)zma Wrote:
(11-02-2015 02:24 PM)amoners Wrote: Please provide codb2's name in Carus, like 'l0web0e1-rider2'. So I can add this VM in Constella, or there is a exist name but I never find. Thanks.

I don't know either.. Here is a list of VM I find on it while they are not in Constella, please check:

gitbj0e1
gitliter0e2
rider2e3

It seems that I can not start VM by Constella on Carus. Could you start it refer to "Moreover, /root/lav.sh starts all regular VMs on it and /root/sav.sh stops all VMs. If we want to regularly start/stop a VM on carus, we should as the VM to sav.sh and lav.sh. This mechanism may be replaced by Constella later." ?

Have you start VM by Constella on Carus before?

RE: connectiopn reset on codb2 - zma - 11-02-2015 05:52 PM

(11-02-2015 04:37 PM)amoners Wrote:
(11-02-2015 03:23 PM)zma Wrote:
(11-02-2015 02:24 PM)amoners Wrote: Please provide codb2's name in Carus, like 'l0web0e1-rider2'. So I can add this VM in Constella, or there is a exist name but I never find. Thanks.

I don't know either.. Here is a list of VM I find on it while they are not in Constella, please check:

gitbj0e1
gitliter0e2
rider2e3

It seems that I can not start VM by Constella on Carus. Could you start it refer to "Moreover, /root/lav.sh starts all regular VMs on it and /root/sav.sh stops all VMs. If we want to regularly start/stop a VM on carus, we should as the VM to sav.sh and lav.sh. This mechanism may be replaced by Constella later." ?

Have you start VM by Constella on Carus before?

I run lav.sh. It started several VMs. Please check whether codb2 is alive.

I don't remember. The VM file formatting seems not compatible with Constella's requirement. That may be the problem.

RE: connectiopn reset on codb2 - lingu - 11-03-2015 01:26 PM

(11-02-2015 05:52 PM)zma Wrote: I run lav.sh. It started several VMs. Please check whether codb2 is alive.

I don't remember. The VM file formatting seems not compatible with Constella's requirement. That may be the problem.

codb2 seems to be working now.

We should make the VMs compatible with Constella one by one. Starting from the VM for codb2?

codb2 should be gitliter0e2.

RE: connectiopn reset on codb2 - lingu - 11-03-2015 01:51 PM

(11-02-2015 05:52 PM)zma Wrote: I don't remember. The VM file formatting seems not compatible with Constella's requirement. That may be the problem.

Where is the info about 'VM file formatting'? I cannot find it any more.

RE: connectiopn reset on codb2 - zma - 11-03-2015 02:39 PM

(11-03-2015 01:51 PM)lingu Wrote: Where is the info about 'VM file formatting'? I cannot find it any more.

--> http://tab.d-thinker.org/showthread.php?tid=3701

RE: connectiopn reset on codb2 - lingu - 11-03-2015 05:29 PM

(11-03-2015 02:39 PM)zma Wrote:
(11-03-2015 01:51 PM)lingu Wrote: Where is the info about 'VM file formatting'? I cannot find it any more.

--> http://tab.d-thinker.org/showthread.php?tid=3701

Git it. But I cannot link VM file formatting to 'Integrate a PH'.

I will suggest some changes to the info organization there.

RE: connectiopn reset on codb2 - lingu - 11-03-2015 05:45 PM

(11-02-2015 05:52 PM)zma Wrote:
(11-02-2015 04:37 PM)amoners Wrote:
(11-02-2015 03:23 PM)zma Wrote:
(11-02-2015 02:24 PM)amoners Wrote: Please provide codb2's name in Carus, like 'l0web0e1-rider2'. So I can add this VM in Constella, or there is a exist name but I never find. Thanks.

I don't know either.. Here is a list of VM I find on it while they are not in Constella, please check:

gitbj0e1
gitliter0e2
rider2e3

It seems that I can not start VM by Constella on Carus. Could you start it refer to "Moreover, /root/lav.sh starts all regular VMs on it and /root/sav.sh stops all VMs. If we want to regularly start/stop a VM on carus, we should as the VM to sav.sh and lav.sh. This mechanism may be replaced by Constella later." ?

Have you start VM by Constella on Carus before?

I run lav.sh. It started several VMs. Please check whether codb2 is alive.

I don't remember. The VM file formatting seems not compatible with Constella's requirement. That may be the problem.

The VM configuration file for gitliter0e2 was vm.cfg. This was incompatible with the requirement in http://tab.d-thinker.org/showthread.php?tid=3701 .

It's fixed to be vmcfg now.

RE: connectiopn reset on codb2 - lingu - 11-03-2015 11:37 PM

(11-03-2015 05:45 PM)lingu Wrote: The VM configuration file for gitliter0e2 was vm.cfg. This was incompatible with the requirement in http://tab.d-thinker.org/showthread.php?tid=3701&pid=12747#pid12747 .

It's fixed to be vmcfg now.

It seems that we still cannot start/stop gitliter0e2 on Constella (BL).

Constella complained "Hypervisor error" when starting/stopping the VM.

RE: connectiopn reset on codb2 - amoners - 11-04-2015 12:02 AM

(11-03-2015 11:37 PM)lingu Wrote:
(11-03-2015 05:45 PM)lingu Wrote: The VM configuration file for gitliter0e2 was vm.cfg. This was incompatible with the requirement in http://tab.d-thinker.org/showthread.php?tid=3701&pid=12747#pid12747 .

It's fixed to be vmcfg now.

It seems that we still cannot start/stop gitliter0e2 on Constella (BL).

Constella complained "Hypervisor error" when starting/stopping the VM.

I guess the problem is the domain name of Carus have been changed. I rembermed that you and qiyu dicussed about external domain and port about Constella, but I can't found infos. Maybe Qiyu have implemented it without recorded(or I can't find it). I checked when add a PH you can input external domain and port, so I assumed this function have been implemented. I can't verify in code tree vrs2 since codb2 seems down again where vrs2 located.

RE: connectiopn reset on codb2 - lingu - 11-04-2015 09:26 PM

(11-04-2015 12:02 AM)amoners Wrote:
(11-03-2015 11:37 PM)lingu Wrote:
(11-03-2015 05:45 PM)lingu Wrote: The VM configuration file for gitliter0e2 was vm.cfg. This was incompatible with the requirement in http://tab.d-thinker.org/showthread.php?tid=3701&pid=12747#pid12747 .

It's fixed to be vmcfg now.

It seems that we still cannot start/stop gitliter0e2 on Constella (BL).

Constella complained "Hypervisor error" when starting/stopping the VM.

I guess the problem is the domain name of Carus have been changed. I rembermed that you and qiyu dicussed about external domain and port about Constella, but I can't found infos. Maybe Qiyu have implemented it without recorded(or I can't find it). I checked when add a PH you can input external domain and port, so I assumed this function have been implemented. I can't verify in code tree vrs2 since codb2 seems down again where vrs2 located.

codb2 should be back now.

When fixing this problem, please also improve the info recording of Constella. From one overview, we should be able to find every piece of relevant info about it. The overview can be in an internal board, and it can point out to and contain internal/external/public info.

RE: connectiopn reset on codb2 - Charlessroyal143@gmail.com - 05-13-2016 06:54 PM

Some times the vitrtual machine may get problems. As a guardian of codb2 you can get help from any one operator. If you still need to operate it by own. Collect some resources from google. You can achieve it. Now i am busy with my paper presentation with help of academic writing services. Hope you will get a solution soon.